7-4-3) Auxiliary Work - SunStar SWF/C Series User Manual

Press DOWN once.
Press

7-4-3) Auxiliary Work

Press when the machine is turned on and the operating system loads. You will see a screen like this:
These menus help you prepare before starting embroidery work.
1. LENGTH MEASURE: measures the length between two selected points.
2. DESIGN TRACE: checks the outline area of the selected design.
3. OPTIMIZE TRACE: traces the shape of the selected design.
X[mm]
Y[mm]
ANGLE
MIRROR
The X and Y lengths changed and the Angle is
set at 45 degrees.
Machine Information Screen shows 100 stitches
progressed already.
1. LENGTH MEASURE
2. DESIGN TRACE
3. OPTIMIZE TRACE
7-27
:
: 135.0
:
:
100/18294 st[
96.5
45
OFF
0%]