4.3) Thread
4.3.1) Upper and Lower Thread Placement
1) Upper Thread Placement
Place the thread take-up lever at the highest position, and pass the thread through the main and sub thread adjusting
devices.
H-type Upper Thread Placement
2) Lower Thread Placement
Insert the bobbin into the bobbin case. Insert thread
into the groove and pass it under the tension
adjusting plate spring.
4.3.2) Threading
Place the thread take-up lever at the highest position and
then conduct threading. For heavy materials, conduct
threading as in Fig. ①, and for general and light
materials and knit, conduct threading as in Fig. ②.
4.3.3) Bobbin Case Insertion/Removal
Push the bobbin into the hook by holding the bobbin
case handle until you hear a click sound.
If the bobbin case and the hook are not accurately assembled, thread might be entangled or the
bobbin case might be ejected during machine operation. Make sure that the bobbin case is
completely inserted into the hook before operating the machine.
Caution
H-type Upper Thread Placement
① Heavy Materials
② General Materials
21