7-4-2) Basic Set-up
When the machine is turned on and operating system loads, press
changes. Set-up items are as follows:
①
X_Scale: Reduces or enlarges the design along the X axis (left to right).
The default is 100% and the allowed range runs from 50% to 200%.
② Y_Scale: Reduces or enlarges the design along the Y axis (top to bottom).
The default is 100% and the allowed range runs from 50% to 200%.
Designs can be enlarged in both the X and the Y directions.
③ Angle: Rotates the design in a set angle.
The default is 0° and designs can be rotated from 0 to 359° in the increments of 1° .
[100%]
[100%]
[100%]
[0°]
. This allows the set-up of basic design
7-22
[200%]
[200%]
[200%]
[90°]