7-4-7) Frame Movement - SunStar SWF/C Series User Manual

7-4-7) Frame Movement

(1) Moving Frame During Embroidery
Press when the operating system loads and you will see the following screen:
■ ■ DATA ORIGIN
(Frame moves back)
Your SWF machine remembers the stopped position of the frame when it stops during operation (bar switch, thread
break detection, etc.) After you move the frame by frame movement key and do work, you can use the
ORIGIN function to automatically move the frame back to the previously stopped location to resume embroidery
work.
■ ■ ORIGIN (Start of embroidery)
This function moves the frame back to the first point of work.
1. DATA ORIGIN
2. ORIGIN
3. POWER RESUME
4. FRAME ANGLE SET
A) Start point of embroidery
B) Stop point of embroidery
C) Frame moved by frame movement key
D) Frame moved by DATA ORIGIN
A) Start point of embroidery
B) Stop point of embroidery
C) Frame moved by ORIGIN
7-51
DATA