Adjustment Of Lifting Amount Of Main And Auxiliary Presser Foot; Pressure Adjustment Of The Presser Foot - SunStar KM-1060BL User Manual

7) Adjustment of lifting amount of the main and auxiliary presser foot
The lifting level of the main presser foot① and auxiliary presser foot② can be adjusted from 1 to 7 mm by the upper lid dial③. If you
turn the upper lid dial ③ around to a carved sign④ so that the figure on the dial faces the carved sign, the main presser foot① and
auxiliary presser foot② will start a mutual crossing movement as much as the set figure indicates. For trimming types only, when the light
comes on by pressing the switch⑤ on the arm, the mutual crossing movement will change to the maximum value of 7 mm regardless of
the set value indicated on the dial③. When the light goes off by repressing the switch, the movement will change automatically to the set
value on the dial. .

8) Pressure adjustment of the presser foot

If you turn the dial① on the upper part of the faceplate in a clockwise direction, the pressure of the auxiliary presser foot will increase, and
decrease if turned counterclockwise.
24
③
④
⑤
[ Fig. 35 ]
①
Strong
Weak
②
①
Operates at the setting value of dial
[ Fig. 37 ]
[ Fig. 36 ]