500-8067.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DJH • Revision 05
12.11 Floor openings and fixing points
The following overviews show the required floor openings and fixing points for the different
panel types and pressure relief methods.
Panels with a panel width of 310 mm have two recesses in the subframe for reasons of space.
These recesses must be observed for planning the foundation.
Fig. 33:
Recess in the subframe
Panel blocks
Dimension drawings for panel versions with double cables, deep cable compartment cover, or
other versions can be ordered via the regional Siemens representative.
Dimension drawing
Installation
Panel block
Width
RR
620 mm
RK
KR
RRT
1050 mm
RRL
RT
740 mm
RL
KT
KL
RTR
1050 mm
RLR
RRR
930 mm
RRRR
1240 mm
59/121