Installing Cable Plugs Type Raychem Rics5Xxx With Rda - Siemens 8DJH Installation And Operating Instructions Manual
Medium-voltage switchgear
Hide thumbs
Also See for 8DJH:
- Installation and operating instructions manual (174 pages) ,
- Operator's manual (2 pages) ,
- Operator's manual (2 pages)
Table of Contents
Advertisement
Installation
66/121
13.2
Installing cable plugs type Raychem RICS5xxx with RDA
➭ Remove the upper cross member at the panel. To do this, remove 4 self-tapping bolts M6 ①
.
Fig. 36:
Removing the upper cross member
➭ Mount cable plug type Raychem RICS5xxx with surge arrester RDA. Observe the installation
instructions of the cable plug and surge arrester manufacturer (see order documents).
➭ Push the surge arrester plate ② between the hexagon nuts of the adapter feet, and tighten.
Use hexagon nuts M12 ① with conical spring washers ③ .
Fig. 37:
Mounting the surge arrester plate and the adapter feet
➭ Fasten the upper cross member with 4 self-tapping bolts M6 ① .
Fig. 38:
Mounting the upper cross member
Revision 05 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DJH • 500-8067.9
Advertisement
Table of Contents
