Siemens 8DJH Installation And Operating Instructions Manual page 17

Option
Features
Option
500-8067.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DJH • Revision 05
• Mounted cable clamps on cable brackets
• Deep cable compartment cover
• Cable testing, e.g. with measuring bolt, see page 112, "Cable testing"
Cable connection for transformer feeders
For the cable connection, customary cable plugs for interface type A with plug-in contact
(standard), or interface type C with bolted contact M16 (option) are used according to
EN 50181/DIN EN 50181.
Available designs:
• Screened (conductive) design (standard)
• 1 cable per phase
For recommended cable plugs with interface type A and possible connection cross-sections,
see page 19, "Cable plugs for single cable connection (interface type A)". For cable plugs with
interface type C, see page 18, "Cable plugs for single cable connection (interface type C)". The
installation of further makes and types is possible on request.
• Mounted cable clamps on cable bracket
Possible connection options (examples):
Fig. 11: Cable feeder downwards with elbow
plugs (interface type A)
Fig. 13: Cable feeder to the front with elbow
plugs or T-plugs (interface type C)
①
Cable plug
② Earthing
Fig. 12: Cable feeder downwards with
straight plugs (interface type A)
Fig. 14: Cable feeder backwards with elbow
plugs (interface type A)
Description
17/121