Master Control Center (Mcc) - Lucent 5ESS DRM User Manual

235-200-150
Feburary 2007
BGE Port
0 SM
1 Not assigned
2 ASM
3 Not assigned

2.9.5 Master Control Center (MCC)

The Master Control Center (MCC) is the primary communication link between on site
maintenance personnel and the DRM. A dual ported terminal is used to connect the
Solaris Console to the A serial port and the MCC to the B serial port on the rear of
the Netra t 1120 and Netra 20 AW. For a Netra 240 AW, the Solaris Console is
connected to the DB-9 serial port on the rear of the AW and the MCC is connected to
serial port 6 on SAI-1.
Figures 2-25, 2-26 and 2-27 illustrate the MCC and Solaris Console cable connections
for the KS-22396 terminal.
MCC Terminal
Keyboard
Figure 2-25 — KS-22396 MCC Interface to Administrative Workstation - Netra t 1120
Issue 3.00O
®
5ESS
SWITCH DISTINCTIVE REMOTE MODULE
Table 2-8 — BGE Port Assignments
Ethernet Networks
AUX Port EIA Port
PCI
1
Video
PCI PCI PCI
2 3 4
Page 2-31