Dynastar Router Software Version Procedure - Lucent 5ESS DRM User Manual

235-200-150 NETWORK PROCEDURES
April 2004 Procedure 3.13
3.13

DynaStar Router Software Version Procedure

Purpose
The DynaStar Router Software Version Procedure is used to obtain the version
number for the software running on a DynaStar router configured in a DRM network.
Before You Begin
An understanding of the DRM network using the Lucent Technologies Network
Component Solution (LNCS) is required. See, Section 2.7, The DRM Network for more
information.
Required Tools
Access to the ASM with root permission is required.
Required Conditions
Log onto the ASM with root permission. If an HA-ASM configuration is being used,
perform this procedure from the "lead" or "standby" ASM. For more information, see
Section "Accessing the ASM," in 235-200-145, OneLink Manager Administrative
Services Module User's Guide.
Required Information
Before beginning this procedure, obtain the IP address for the DynaStar routers. This
information should be stored in the office records. The following table provides the
Lucent defined default IP addresses, a column to record the customer defined IP
addresses if used, and a column to record the DynaStar routers software version
numbers.
Issue 3.00G Page 3.13-1