Compact Switch Processor Patch Space - Lucent 5ESS DRM User Manual

235-200-150
January 2003
5.9

Compact Switch Processor Patch Space

OVERVIEW
The patch space compaction is normally used when the target's switching module
patch space becomes insufficient and failed the program update process. The patch
space compaction operation will try to increase the size of the target's patch space and
make the program update process successful.
Note: If there is a need to backout of patch space compaction after it has been made
official, the backout last official (BOLO) process can be used for backout. See "Backout
Last Official Software Update(s)," Procedure 5.6.
The target's patch space may become so fragmented or insufficient that even this
procedure will be unable to generate sufficient patch space for a successful program
update process.
PROCEDURE
1. Enter the following command:
UPD:PATCH:TARGET=a,ACTION=b;
a = SM, SM2K, or CMP
Where:
b = APPLY, OFC, or BKOUT
APPLY = Execute patch space compaction and APPLY on requested target.
OFC = make official for APPLYed target.
BKOUT = Backout previously requested APPLYed target.
The system responds with:
NG = No good.
PF = Printout follows. The ALW:TRFC30 output message will be printed.
INPROG = In progress. The message was accepted and the action is in progress.
CMPL,action = complete action's process. The valid values for action are: APPLY,
OFC or BKOUT.
2.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
Issue 3.00
ROUTINE MAINTENANCE
Procedure 5.9
Page 5.9-1