NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
3.3 Installation Process
Remove the protective plastic bag from the cabinet only immediately before installation. Do
not remove the bag during equipment room renovation or infrastructure construction;
otherwise, dust may enter the cabinet and affect the internal components.
Figure 3-12 Installation flowchart
3.4 Checking the nitrogen pressure
Context
Procedure
Step 1 Open the door lock using a key, and open the cabinet rear door.
Step 2 Unfasten the rotating baffle plates, and remove the air filters.
Issue 07 (2020-03-16)
The device has been injected with 0.3–0.5 MPa nitrogen before delivery. Check the
nitrogen pressure for nitrogen leakage.
You can open or close the exhaust valve using a flat-head screwdriver.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
37