How To Modify A Password - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual

----End

7.1.14 How to Modify a Password

Prerequisites


Procedure
Step 1 On the home screen, choose Settings > User Settings to enter the User Settings screen, as
shown in
Issue 07 (2020-03-16)
Figure 7-16 Screen displayed when the calibration is complete
Calibrating the screen by DIP switch.
a. Flip toggle switch 1 for the display to ON, and others to the opposite position, and
wait for 3 seconds before calibrating.
b. Flip the fourth toggle switch to ON and others remain unchanged. The screen
calibration function is triggered.
After 15 seconds, a dialog box indicating Are you sure you want to calibrate the
screen? If you do not click Confirm or Cancel, calibration will start
automatically 10s later. is displayed.
c. Wait for 10 seconds or tap Confirm.
When Figure 7-16
d. Flip toggle switch 1 for the display to ON, and others to the opposite position.
 After the DIP switch is calibrated, flip toggle switch 1 to ON, and others to the opposite position.

You need to manually operate the operation again from the first step to trigger the touchscreen
calibration function after the calibration failure.
To modify a password, log in as the admin user or operator user.
You can only modify the password of the current user.
Figure 7-17.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-15
is displayed, the adjustment is complete.
is displayed. Tap the screen.
7 FAQ
186