Optional) Setting Wifi Parameters - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
Follow-up Procedure
After a USB flash drive has been inserted into the controller USB port and successfully
identified, tap Export File under MIB File to export the MIB file to the USB flash drive for
the customer's use in accessing a third-party EMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus software
and is secure.
Figure 4-16 Exporting the MIB file successfully

4.3.5 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the smart cooling
product display, WIFI Settings is enabled to be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Step 2 Set the parameters by referring to
Table 4-11 WiFi settings
Parameter
WiFi SSID
WiFi Password
Issue 07 (2020-03-16)
Table
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID is the
name used for the WiFi hotspot over which a mobile phone can
connect to the smart cooling product.
Enter the WiFi password when you use a mobile phone to connect
to the WiFi. When you enable the WiFi function for the first time,
Copyright © Huawei Technologies Co., Ltd.
Figure 4-16 shows successful file export.
4-11.
4 Commissioning
88