Optional) Installing A Differential Pressure Sensor - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
Position Name
temp/humid
Cold aisle 2
temp/humid
Cold aisle 3
temp/humid
Cold aisle 4
temp/humid
Cold aisle 5
temp/humid
Hot aisle Hot aisle 1
temp/humid
Hot aisle 2
temp/humid
Hot aisle 3
temp/humid
Hot aisle 4
temp/humid
Hot aisle 5
temp/humid



----End

3.12.7 (Optional) Installing a Differential Pressure Sensor

Procedure
Step 1 Secure the differential pressure sensor and the fasteners using M5 tapping screws, as shown in
step 1 in
Issue 07 (2020-03-16)
Address DIP Switch ID
12
13
14
15
21
22
23
24
25
The default addresses of T/H sensors purchased from Huawei are 1.
Keep the last RS485_R toggle switch at OFF.
After the addresses are set, power on the device. On the display's home screen, choose
Settings > System Settings > T/H Sensor and set the sensors in the aisles corresponding
to the addresses to Enable. Otherwise, the sensors will not work.
Figure 3-40.
Copyright © Huawei Technologies Co., Ltd.
1 2 3
OFF OFF ON
ON OFF ON
OFF ON ON
ON ON ON
ON OFF ON
OFF ON ON
ON ON ON
OFF OFF OFF
ON OFF OFF
3 Installation
4 5 6
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
ON ON OFF
ON ON OFF
61