Removing The Pallet - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual


Figure 3-15 Checking the nitrogen pressure
----End
Follow-up Procedure
Check that thermal insulation foam is in close contact with the pipes, there is no crack in each
cutting position, and the chilled water valve is tightly wrapped by thermal insulation foam.

3.5 Removing the Pallet

Procedure
Step 1 Remove the connecting kit that secures the cabinet to the pallet from the bottom of the two
side panels of the cabinet, as shown in
Issue 07 (2020-03-16)
If gas emits, the system is normal. Slowly open the exhaust valve to discharge nitrogen
and close the valve when there is no airflow through the valve.
If no gas emits out of the valve, contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-16.
3 Installation
39