Calibrating The Screen - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual

7.1.13 Calibrating the Screen

Context




Procedure

Issue 07 (2020-03-16)
You can calibrate for touching point deviation on the touchscreen.
You can calibrate the screen by tapping the screen on the Screen Calibration page or by
DIP switch.
Tapping the screen on the Screen Calibration page: The program of the display
−
board works normally; the deviation between the touching point and the responding
point is small; the Maint > Screen Calibration page can be entered over the
screen.
Calibrating the screen by DIP switch: The display board works normally; the
−
deviation between the touching point and the responding point is unfavorably big;
or the screen does not respond when being tapped.
You can calibrate the screen by DIP switch only when the system enters Quick Settings
page after the first power-on or when the system is on the home screen.
Touch the display screen firmly if you are using your fingertips. It is recommended that
you use the pen tip for accurate selection and quick response.
When calibrating the screen by tapping the screen, tap Maint > Screen Calibration, as
shown in Figure 7-15.
Figure 7-15 Screen calibration page
Copyright © Huawei Technologies Co., Ltd.
Figure 7-16 is displayed when the screen calibration is complete.
7 FAQ
185