Table of Contents
Advertisement
4
Instrument Setup
4.
Instrument Setup
4.1
Installation site requirements
• The instrument requires an installation area of approx. 438 x 472 mm.
• Room temperature consistently between +10 °C and +35 °C
• Relative humidity 80 % maximum - non-condensing
• Ambient pressure from 740 hPa to 1100 hPa
• Elevation: up to max. 2000 m NN
• The instrument is designed for indoor use only.
• Obstruction-free access to the handwheel.
• For smooth function, also make sure that no other instruments that cause vibrations are standing in
the immediate vicinity of the instrument.
• The substrate must be largely vibration-free and have sufficient load capacity and rigidity for the
weight of the instrument.
• Avoid vibrations, direct sunlight, and large temperature fluctuations.
• The chemicals to be used are easily inflammable and hazardous to health. Therefore the installation
location must be well ventilated, and must contain no sources of ignition of any kind.
4.2
Standard delivery
Qty.
Designation
1
Leica RM2125 RTS basic instrument
The basic instrument includes the following:
1
specimen holder fixture, directional with quick change
system for specimen clamps (installed on the instrument)
1
tool set - consisting of:
1
Allen key with handle, No. 3
1
Allen key with handle, No. 4.
1
Allen key, No. 8
1
bottle (50 ml) of oil for drives, type 405
1
dust protective cover
1
Leica RM2125 RTS English Instructions for Use
(+ language CD)
You will find this, as well as other accessories you may have ordered, packed in the top of the carton
(→ Fig.
6).
Note
Compare the delivered components with the parts list and your order.
Should you find any discrepancies, please contact your Leica sales office without delay.
18
Order No.
14 0457 46960
14 0457 46961
14 0194 04764
14 0194 04782
14 0222 04143
14 0336 06086
14 0212 53157
14 0457 80001
Version 2.6, Revision J
Advertisement
Table of Contents
