A-1 Data Sheet; Model List - Omron sysmac NX Series User Manual

Appendices

A-1 Data Sheet

The specifications of individual System Units are shown below.
A-1-1

Model List

Additional NX Unit Power Supply Unit
Model
NX-PD1000
Additional I/O Power Supply Unit
Model
NX-PF0630
NX-PF0730
*1. When an Additional I/O Power Supply Unit is connected to the CPU Rack of a CPU Unit, the maximum I/O
power supply current value may be smaller than that of the Additional I/O Power Supply Unit. For example,
the maximum I/O power supply current for the CPU Rack of an NX1P2 CPU Unit is 4 A. For the maximum
I/O power supply current of the CPU Rack, refer to Maximum I/O Power Supply Current under Designing the
I/O Power Supply from the NX Bus in the hardware user's manual for the CPU Unit to which NX Units are
connected.
I/O Power Supply Connection Unit
Model
NX-PC0020
NX-PC0010
NX-PC0030
Shield Connection Unit
Model
NX-TBX01
A-2
Rated power supply
voltage
24 VDC
Rated power supply
voltage
5 to 24 VDC
5 to 24 VDC
Number of I/O power
supply terminals
IOV: 16 terminals
IOG: 16 terminals
IOV: 8 terminals
IOG: 8 terminals
Number of shield terminals
14 terminals
(The following two terminals are
functional ground terminals.)
NX Unit power supply capacity
10 W max.
Maximum current of I/O power
supply
4 A
*1
10 A
Current capacity of I/O power sup-
ply terminal
4 A/terminal max.
page A-21
NX-series System Units User's Manual (W523)
Reference
page A-5
Reference
page A-9
page A-11
Reference
page A-14
page A-16
page A-18
Reference