Hardware And Firmware Requirements - Agilent Technologies PSA Series User Manual

Hardware and Firmware Requirements

One of the following Agilent spectrum analyzers and associated
hardware options is required to run Option 215 External Source
Control.
Option 215 External Source Control requires the gated sweep
NOTE
functionality that is provided by the more recent LO synthesizer and
front end driver hardware. The part numbers of the boards providing
this gated sweep functionality are shown in
Table 1-1
Analyzer
Model
Number
E4440A
E4443A
E4445A
E4446A
E4448A
a. Press
ber of your front end driver board.
b. If you do not have the required hardware, you can order
Option 426 to upgrade the hardware.
c. Press
ber of your LO synthesizer board.
d. Option 215 will not run on a model E4445A which has the
HA5 "Restricted Performance" option installed.
Chapter 1
Compatible Agilent PSA Series Spectrum
Analyzers
Upper Firmware
Frequency
Limit
26.5 GHz A.07.09 or
later
6.7 GHz A.07.09 or
later
d 13.2 GHz A.07.09 or
later
44.0 GHz A.07.09 or
later
50.0 GHz A.07.09 or
later
, ,
System More 1 of 3
, ,
System More 1 of 3
Hardware and Firmware Requirements
Table 1-1
Front End
a b
Driver
Any EXCEPT
part numbers
E444060242
or
E444060002
Any EXCEPT
part numbers
E444660059
or
E444660006
to show the part num-
Show Hdwr
to show the part num-
Show Hdwr
Getting Started
(below).
LO
Synthesizer
c b
Board
Any
EXCEPT
part number
E444060008
7