Power Sweep - Agilent Technologies PSA Series User Manual
Option 215 for the psa series of spectrum analyzers
Hide thumbs
Also See for PSA Series:
- Service manual (436 pages) ,
- User and programming manual (434 pages) ,
- Manual (382 pages)
Table of Contents
Advertisement
4.4.3 Power Sweep
The external source amplitude is swept over the specified number of sweep points.
Mode:
Key Path:
Remote Command:
Factory Preset:
State Saved:
SCPI Resolution Max:
Dependencies and
Couplings:
Example:
Chapter 4
Spectrum Analysis
Source, Config Sweep
:SOURce:EXTernal:SWEep:POWer:SPAN <rel_ampl>
:SOURce:EXTernal:SWEep:POWer:SPAN?
:SOURce:EXTernal:POWer:MODE FIXed|SWEep
:SOURce:EXTernal:POWer:MODE?
0.00 dB, FIXed
Saved in instrument state.
1.00 dB
Parameter is disabled if active mode is not Spectrum Analyzer
mode or a connection has not been established at you specified
IP address.
SOUR:EXT:SWE:POW:SPAN 10 dB
SOUR:EXT:SWE:POW:MODE SWE
Source Key and Programming Commands
Configure Sweep
57
Hide quick links:
Advertisement
Table of Contents
