Source Key and Programming Commands
Configure Sweep
4.4 Configure Sweep
4.4.1 Offset Sweep
Offset sweep offsets the frequency of the signal generator from the frequency of the PSA. One application
for offset sweep is testing mixer conversion loss. See the following graphic.
Mode:
Key Path:
Remote Command:
Factory Preset:
State Saved:
SCPI Resolution Max:
54
Spectrum Analysis
Source, Config Sweep
:SOURce:EXTernal:SWEep:OFFSet:FREQuency <freq>
:SOURce:EXTernal:SWEep:OFFSet:FREQuency?
:SOURce:EXTernal:SWEep:OFFSet[:STATe] ON|OFF|1|0
:SOURce:EXTernal:SWEep:OFFSet[:STATe]?
0.00 Hz, OFF
Saved in instrument state.
1 Hz
Chapter 4