Table of Contents
Advertisement
9. OTHER SETTINGS
[6 Current Data Display]: Selects how to display tidal current data. The choices are
[32 CMPS] (32 compass points), [360°True] (True bearing), [360°] (360° Relative),
and [±180°] (180° Relative).
[7 Unit of Water TEMP]: Selects water temperature unit, °C (Celsius), or °F (Fahren-
heit).
[8 Water TEMP Range]: Selects the time range to show water temperature, 20 Min-
ute, 1 Hour, 6 Hours, 12 Hours, or 24 Hours.
[9 Fishing Area]: No use.
9.2.6
[Current VEC & Wind] menu
The [Current VEC & Wind] menu sets up how to display tidal current and wind data.
To show this menu, open the [Mark & Operation Support Tool] menu, then select [5
Current VEC & Wind].
Current and wind data display require appropriate data input. For details, see "DATA
INPUT REQUIREMENTS" on page AP-12.
[1 Current Data]: Selects how to display current data, absolute or in relation to current
layers (1, 2, 3, 4 or 5).
[2 On Own Ship Mark]: Shows or hides the current mark shown on the own ship
mark.
[3 On Ship Position Mark]: Shows or hides the current mark on the own ship position
mark.
[4 On Net Shoot Mark]: Shows or hides the current mark shown on the net shoot
mark.
[5 Current Flow Dir]: Selects from what
Current Vector
direction to display current data. [FROM]
shows from what direction the current is
flowing; [TO] shows the direction the cur-
1
1
rent is heading. Requires connection of a
2
2
current indicator.
3
3
To
From
9-7
Advertisement
Table of Contents
