Furuno FSV-75 Operator's Manual page 213

4. Remove the brake release lever pin with a pair of pliers.
5. Unfasten three bolts to remove the brake cover.
Bolt Bolt
6. Unfasten the fan bolt, then remove the fan.
7. Unfasten both release plates (one on either side) with a hex wrench, then remove
the plates.
Release plate Release plate
8. Referring to the following figure, unfasten the three screws, then remove the wa-
terproofing cover and washer.
Screws
Brake release Brake release
lever pin lever pin
Remove brake cover Remove brake cover
Fan bolt Fan bolt
10. MAINTENANCE
10-25