Table of Contents
Advertisement
6. Select [Quit], then left-click.
7. Close the menu.
5.13.5
How to set the depth scale display
Do as follows to change the depth scale display setting:
1. Open the menu.
2. Select [7 3D Functions], then left-click.
3. Select [6 Marks], then left-click.
4. Select [5 Depth Scale], then left-click.
5. Select [1 Scale Reference], then left-click.
6. Select the desired setting, then left-click.
• [OFF]: Hide the depth scale.
• [VERT - Bow]: The depth scale is vertical to the bow line.
• [HOR - Bow]: The depth scale is horizontal with the bow line.
7. Select [Quit], then left-click.
8. Select [2 Show Scale], then left-click.
9. Select [ON] or [OFF], then left-click.
Select [ON] to show the scale indication on the depth scale.
10. Select [Quit], then left-click.
11. Close the menu.
You can show/hide these scale indications from the menu.
You can show/hide these scale indications from the menu.
[HOR - Bow]
Depth scale
Depth scale
[VER - Bow]
[VER - Bow]
5. 3D MODE
[HOR - Bow]
5-25
Advertisement
Table of Contents
