Furuno FSV-75 Operator's Manual page 195

Message
Processor unit
<< SHIP SPD
ALARM!! >>
Alarm and warning priorities
When multiple warnings occur at the same time, the warning with the highest priority
is displayed. The order of priority is as follows:
Priority
1 <<TD IS A HALT CONDITION!!>>
2 <<TRANSDUCER NOT
RETRACTED!! >>*
3 <<OVERVOLTAGE!! >>
4 <<OVER TEMPERATURE!! >>
5 <<ELECTRIC CHARGE!! >>*
6 <<NO RESPONSE FROM
TRANSCEIVER UNIT!! >>
*: These messages are not erased even if an alarm/warning of higher priority occurs.
Level
Alarm Meaning: Ship's speed exceeded the
threshold speed (see section 9.2.9) when
the transducer is extended.
Remedy: Silence the buzzer. Lower the
ship's speed.
Behavior: The window disappears.
Alarm Meaning: Ship's speed exceeded the
threshold speed (see section 9.2.9) when
the transducer is being raised/lowered.
Remedy: Silence the buzzer. Lower the
ship's speed.
Behavior: The window disappears.
Message
10. MAINTENANCE
Meaning, Remedy
Remarks
Remains on-screen until the
cause is removed or rectified.
Remains on-screen until the
cause is removed or rectified.
Remains on-screen until the
cause is removed or rectified.
10-7