10.10 Tests; 1How To Use The Test Menu - Furuno FSV-75 Operator's Manual

10.10 Tests

A comprehensive diagnostic facility is provided for testing the equipment. If you feel
the equipment is not working properly, conduct the test to find the cause.
If NG (No Good) appears in the test results for any test, contact your dealer for advice.
Note: Check that the system is correctly connected before doing any test.
10.10.1 How to Use the test menu
1. Open the menu.
2. Select [8 Test], then left-click.
Note: If you are using [9 Transmission] to determine a noise source, be sure to set it
back to [ON] after you have found the noise source. The menu items [ON(No Charge)]
and [ON(No Alarm)] should not be selected by the operator.
* *
* *
* *
* *
Left click Left click
10. MAINTENANCE
* *
* *
* *
*: For qualified technicians only. *: For qualified technicians only.
10-9