Install Exhaust Gas Heat Exchanger; Reconnect All Hoses; Connect All Lead Wires; Install Other Parts - Panasonic U-16GE2E5 Main Parts Replacement

Engine Cylinder Head Inspection and Replacement Procedure

21. Install exhaust gas heat exchanger

Caution
When installing the exhaust gas heat exchanger, rst test assemble everything, then tighten the bolts.
(1) Secure the exhaust gas heat exchanger by tightening
the 4
nuts indicated by arrows in Figure 33.
Nut (width across at)
Tightening torque
(2) Finish the exhaust gas heat exchanger installation by
tightening the 6 bolts indicated by arrows in Figure 34.
Bolt/nut (width across at) 17 [mm]
Tightening torque

22. Reconnect all hoses

Securely connect all hoses and parts, and install and tighten hose bands so that no leakage occurs.

23. Connect all lead wires

Check the pins of the connecting parts to make sure none of them are loose or missing.

24. Install other parts

Install all other parts in the reverse of the sequence by which they were removed.
17 [mm]
37.3 ~ 44.1[N·m]
37.3 ~ 44.1[N·m]
19
Figure Figure
.33 .33
Bolts Bolts
Nuts Nuts
Figure Figure
.34 .34
Nuts Nuts
Hexagon socket Hexagon socket
head bolt head bolt