Panasonic U-16GE2E5 Main Parts Replacement page 35

Ignition Timing Check and Adjustment
(5) Make the correction
Correction example
The adjustment value is 10° BTDC, but the observed value was 8° BTDC. Press the UP (S005) or DOWN (S006)
key to set a correction of +2 in relation to the current "
1) Display the current "
value, and check it. The current value is zero (0).
The display for "
(Figure.19.)
2) With "
press the SET key (S007) for one second or more.
The TEST/WARNING LED (D052) will be
illuminated, and LEVEL LED (D053) will ash.
3) Press the UP (S005) or DOWN (S006) key to set
a correction of +2 in relation to the current value
checked in "1)."
The display will show "
Caution: The display example at right is an
4) With "
the SET key (S007) for one second or more. The
TEST/WARNING LED (D052) will go out, and
LEVEL LED (D053) will be illuminated. The
ignition timing offset mode will be cancelled, and
the setting process will be ended.
" (ignition timing offset)
" will be as shown at
" (ignition timing offset) displayed,
" (Figure.20).
example for when the current value
checked in "1)"is zero (0). If the current
value is "1" and a +2 correction is set
in relation to that value, the value will
become "3" after the setting is made.
The display will show "
(Figure.21)
" (Figure.20) displayed, press
" (ignition timing offset) value.
"
29
Figure. Figure.
19 19
Figure Figure
.20 .20
Figure Figure
.21 .21