Install Ignition Coil Bracket; Install Ignition Coils; Install Intake Manifold And Exhaust Manifold - Panasonic U-16GE2E5 Main Parts Replacement

Engine Cylinder Head Inspection and Replacement Procedure

18. Install ignition coil bracket

(1) Install the ignition coil bracket by tightening the
two securing bolts indicated by arrows in Figure 30.
Bolt securing the bracket
(width across at)
Tightening torque

19. Install ignition coils

Install the ignition coils by tightening the bolts that secure
them (indicated by arrows in Figure 31).
Bolt (width across at)
Tightening torque
Caution
Handle the ignition coils carefully. Keep them free from
shock.

20. Install intake manifold and exhaust manifold

Install the intake manifold and exhaust manifold by
tightening the 10 bolts and nuts indicated by the arrows in
Figure 32 (use a new gasket).
Bolt/nut (width across at)
Bolt (2) tightening torque
Flange nut (4) tightening torque
Nut ( angeless) (4) tightening torque
After installing the exhaust manifold, install the intake
manifold.
12 [mm]
15.7 ~ 17.7[N·m]
10 [mm]
6.37 ~ 7.45[N·m]
14 [mm]
32.4 ~ 38.2[N·m]
41.2 ~ 48.1[N·m]
32.4 ~ 38.2[N·m]
Bolts securing Bolts securing
the bracket the bracket
Ignition coil Ignition coil
Ignition coil retaining bolts (4) Ignition coil retaining bolts (4)
Nuts (no ange) Nuts (no ange)
18
Ignition coil bracket Ignition coil bracket
Figure Figure
.30 .30
Figure Figure
.31 .31
Bolts (2) Bolts (2)
Flanged nuts Flanged nuts
Figure Figure
.32 .32