Remove Rocker Cover; Remove Ignition Coils; Remove Ignition Coil Bracket - Panasonic U-16GE2E5 Main Parts Replacement

Engine Cylinder Head Inspection and Replacement Procedure

8. Remove rocker cover

Remove the cap nuts at the 2 locations indicated by arrows
in Figure 12, remove rocker cover.
Nut (width across at)
Caution
Do not lose the seal washer under the cap nut.

9. Remove ignition coils

Remove the bolts securing the ignition coils, and remove
the ignition coils. (indicated by arrows in Figure 13)
Bolt (width across at)
Caution
Handle the ignition coils carefully. Keep them free from
shock.

10. Remove ignition coil bracket

(1) Remove 2 securing bolts indicated by Figure 14,
remove ignition coil bracket.
Bolt securing the bracket
(width across at)
22 [mm]
10 [mm]
12 [mm]
12
Cap nut Cap nut
Figure Figure
Ignition coils Ignition coils
Ignition coil retaining bolts (4) Ignition coil retaining bolts (4)
Figure Figure
Bolts securing the bracket Bolts securing the bracket
Figure Figure
Seal washer Seal washer
Cap nuts Cap nuts
.12 .12
.13 .13
Ignition coil bracket Ignition coil bracket
.14 .14