Speed & Route Profiler Software; Create File From Driven Route - Racelogic Speed & Route Profiler Manual

3. Speed & Route Profiler Software
Whatever method you use to capture the data, you will always need to load the Speed & Route Profiler
software to edit the data and then download it to the OLED unit.

3.1 Create file from driven Route

If you have data from a Reference driver, in the form of a .VBO file, you should select File  Load and then
select the VBO file that the Reference driver has driven. You will see a small help screen indicating how to
add or remove points. Click OK to continue. Also see page 9 – Adding or Removing Route Points.
When you load a VBO file, you may notice an information box, warning you that the file contains GPS
dropouts.
17/11/2010 |5