Saving The Route - Racelogic Speed & Route Profiler Manual

You will need to set up details for every point on your route. Select both Point set-up Instructions and
Warning distances for each point. The warning distance will be estimated by the program, dependant on the
speed of the reference vehicle before this warning point. This warning distance can of course be changed as
required.
The last point should always be selected as the Finish point.

3.6 Saving the route

When you have finished editing the points you must save the route by selecting File  Save, note the file
will be saved with suffix SPD (speed Profiler Datafile)
17/11/2010 |11