Racelogic Speed & Route Profiler Manual page 13

Editing Speed - contd
Once you have zoomed in on the graph you will see something like the graph as shown below.
Next, hold down the shift key and click with the left mouse key on the start
point, where you wish to adjust the speed and then click on the finish point. Then let go of the Shift key.
This will highlight the area as shown above. A Speed Editor box will then appear, indicating the new speed
for this section. If you wish to change this speed, simply type it into the New Speed box, and then click OK to
accept.
The speed graph will then be redrawn to take this new speed into account, in this case set to 49.23 Km/hr.
Remember to click on Save to save this changed speed section.
17/11/2010 |13