Language; Send To Unit; Help - Racelogic Speed & Route Profiler Manual

3.11.4 Language

This option allows you to select between Deutsch and English language. Selecting this option changes the
language to Deutsch and will cause the program to restart.

3.12 Send to Unit

To download either a Speed Profile .SPP or a Speed & Route profile.SPD to the OLED, click on Send to Unit
in the toolbar. Note, you must first have setup the correct COM port, see section 3.11.2 above.
The file will then be uploaded to the OLED and will erase any previously loaded data. The OLED screen will
show Updating Map Information. Once the Speed Profile has been sent to the OLED a small screen will show
that data transfer is complete, as shown below.

3.13 Help

There are two options under the Help menu option. These are About, which shows the version number of
the software, and manual which loads a PDF copy of the manual.
17/11/2010 |20