Initial Power Up - Intellipass And Intellidisconnect; Intellidisconnect Operation (Starting/Stopping Of The Motor); Intellipass Operation (Starting/Stopping Of The Motor) - Eaton H-Max Series Installation Manual

Initial Power up - IntelliPass and IntelliDisconnect

Initial Power up - IntelliPass and IntelliDisconnect
When the IntelliPass or IntelliDisconnect is first powered up, the startup wizard command should be displayed.
Follow the Quick Setup guide MN040008004E to set up Drive for your specific application with the following exceptions:
When the Bypass screen appears set it to "Enabled" for IntelliPass and "Disabled" for IntelliDisconnect Models

IntelliDisconnect Operation (starting/stopping of the motor)

IntelliDisconnect operation is the identical to a standard H-Max open Drive. The only difference is that an input disconnect
is provided. For more information on Speed control and other Drive features see Application Manual MN04008006E. See
option sections for more information on operation of IntelliDisconnect options i.e. Drive output contactor.

IntelliPass Operation (starting/stopping of the motor)

The IntelliPass operation is similar to the IntelliDisconnect but has the added feature of a built in Drive Bypass. This section
gives basic information on operations for controlling the starting and stopping of the motor in both the Drive and Bypass
modes. For more information on Speed control and other Drive features see Application Manual MN04008006E
The IntelliPass has 2 modes:
Drive mode (normal VFD operation),
Bypass mode (across the line).
The mode is selected via the Keypad. The actual starting and stopping of the motor is determined by the HOA selection and
the Control Place selections. The Control place is defined as the location from where the Drive is started and stopped. The
control place can be: Keypad start button, I/O contacts wired to the logic terminal blocks, Fieldbus control or PC. See Quick
Start Guide MN04008005E or Application Manual MN04008006E for more information.
The only exception is if the M1 Manual Bypass option is supplied, this option can override the Drive logic and can start the
motor in Bypass immediately.
40
H-Max Series Drives IntelliPass®/IntelliDisconnect® IL04008003E April 2013