System Overview - Eaton H-Max Series Installation Manual

System Overview

Block Diagram, Elements of H-Max Frequency Inverters
L1
L2
L3
PE
EMC
Item
Number Description
1 Supply L1, L2/N, L3, PE, input supply voltage U LN = U e at 50/60 Hz:
HMX32: 200V class, three-phase input connection (3 AC 230V/240V)
HMX34: 400V class, three-phase input connection (3 AC 400V/480V)
2 Internal interference suppression filter, category C2 to IEC/EN 61800-3
EMC-connection of internal interference suppression filter to PE
3 Rectifier bridge, converts the AC voltage of the electrical network into DC voltage
4 DC link with charging resistor, capacitor and switching mode power supply unit
(SMPS = Switching Mode Power Supply):
DC link voltage U DC with three-phase input connection (3 AC): U DC = 1.41 x U LN
5 Inverter. The IGBT based inverter converts the DC voltage of the DC link (U DC ) into a three-phase AC voltage (U 2 ) with variable amplitude and
frequency (f 2 ). Sinusoidal pulse width modulation (PWM) with V/f control can be switched to speed control with slip compensation
6 Motor connection U/T1, V/T2, W/T3 with output voltage U 2 (0–100% U e ) and output frequency f 2 (0–320 Hz) output current (I 2 ):
HMX32: 3.7–310A
HMX34: 3.4–310A
100% at an ambient temperature of 104°F (40°C) with an overload capacity of 110% for 60s every 600s and a starting current of 200% for 2s every 20s
7 Keypad with control buttons, graphic display, control voltage, control signal terminals, microswitches, and interface for the PC interface module
(option)
8 Three-phase asynchronous motor, variable speed control of three-phase asynchronous motor for assigned motor shaft power values (P 2 ):
HMX32: 0.55–90 kW (230V, 50 Hz) or 0.75–125 hp (230V, 60 Hz)
HMX34: 1.1–160 kW (400V, 50 Hz) or 1.5–250 hp (460V, 60 Hz)
9 DC link—chokes, to minimize current harmonics
10 H-Max Series Adjustable Frequency Drive MN04008005E—September 2011
R+ R–
+
U/T1
M
V/T2
~
3
W/T3
PE