Checking With Engineering Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

Checking with Engineering tool

Check the protocol execution logs and protocol execution results in the "Protocol Execution Log" screen of Engineering tool.
Operating procedure
1.
Select a module to be debugged.
• Display the "Protocol Setting" screen. (Page 27 Data Communication Procedure)
• Select "Protocol Setting"  [Debugging Support Function]  [Module Selection].
• Select the I/O address and channel of the module to be debugged, and click the [Set] button.
• As the [OK] button is clicked, the module information is set.
2.
Execute the CPRTCL instruction.
3.
Select "Protocol Setting"  [Debugging Support Function]  [Protocol Execution Log].
Window
The logs displayed in the "Protocol Execution Log" screen can be selected from the following two items,
according to the log registration condition.
• Displaying only protocol that completed abnormally.
• Displaying all protocol execution status and execution logs.
The log registration condition can be set in "Execution log options" in the "Various control specification" screen
of Engineering tool.
5 DEBUG SUPPORT FUNCTION
114
5.2 Protocol Execution Log Storage Function (for Predefined Protocol only)