Send/Receive Data Monitoring Function Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

20.2

Send/receive Data Monitoring Function Settings

This section explains how to configure the settings for the send/receive data monitoring function.
The settings are configured with Engineering tool or by program.
Setting with Engineering tool
The setting items for the send/receive data monitoring function are listed below.
Navigation window  [Parameter]  [Module Information]  "Module Name"  [Module Parameter]  "Basic Settings"
 "Various control specification"
■Parameter settings
Parameter setting item
Basic Various Send/receive data
settings control monitoring
specificati function
on specification
20 USING SEND/RECEIVE DATA MONITORING FUNCTION
390
20.2 Send/receive Data Monitoring Function Settings
Send/receive data monitoring function
specification
Stop at buffer full specification
0 timer error outbreak stop designation
Monitor buffer start address
designation
Monitor buffer size designation
Description
Select "monitor start instruction" for constant monitoring.
Select "ON" to stop monitoring when the monitor data area is full.
Select "ON" to stop monitoring when a timer 0 error occurs.
Designate the value to change the monitor buffer address. (Default:
2600H/3300H)
Designate the value to change the monitor buffer size (Default: 0D00H)