Technical Data Of The 230V Class - KEB COMBIVERT F5 Instruction Manual

Technical Data
2.2

Technical data of the 230V class

Inverter size
Housing size
Phases
Output rated power
Max. rated motor power
Output rated current
Max. short time current
OC-tripping current
Input rated current
Max. permissible main fuse gG
Rated switching frequency
Max. switching frequency
Power dissipation at nominal operating
Power dissipation at DC operating
Standstill current at 4 kHz
Standstill current at 8 kHz
Standstill current at 16 kHz
Min. frequency at continuous full load
Max. heat sink temperature
Motor cable cross-section
Min. braking resistor
Max. braking current
Overload characteristic (see annex)
Input rated voltage
Input voltage range
Input voltage at DC operation
Mains frequency
permitted mains forms
Output voltage
Output frequency
Cooling mode (L=air; W=water)
Max. motor line length shielded
1) With the regulated systems 5% are to be subtracted as overmodulation capacity.
2) Max. current before the OL2 function triggers (not in operating mode F5 GENERAL).
3) Recommended minimum cross section of the motor line for rated power and a cable length of upto 100 m (copper).
4) This data is only valid for units with internal brake transistor GTR 7 (see "Unit identification").
5) –
6) The output frequency is to be limited in such way that 1/10 of the switching frequency is not exceeded. Units with higher max. output frequency
are subject to export restrictions and are only available on request.
7) The voltage of the motor is depending on units which are connected upstream and on the control method (example see chapter 3.3 in the annex).
8) Protection in accordance with UL see annex "Certification".
9) Restrictions when using HF filters.
10) Phase conductor grounded mains are only permissible without HF filters
11) with COMPACT only 8 kHz, with F6-K only 8 kHz.
The technical data are for 2/4-pole standard motors. With other pole numbers the inverter must be dimensioned onto the
motor rated current. Contact KEB for special or medium frequency motors.
17
R
3
[kVA] 33
[kW] 18.5
[A] 84
1) [A] 126
[A] 151
[A] 92
8) [A] 100
6) [kHz] 8
11) [kHz] 16
[W] 850
[W] 790
2) [A] 92
2) [A] 84
2) [A] 50
[Hz] 3
[°C]
3) [mm²] 35
4) [Ω] 4.7
4) [A] 85
[V]
[V]
[V]
[Hz]
7) [V]
6) [Hz]
[m]
18 19
R R
3 3
40 46
22 30
100 115
150 172
180 206
116 126
160 160
8 8
16 16
1020 1200
950 1100
110 126
100 115
70 69
3 3
90°C (194°F)
50 50
4.0 3.0
100 132
1
230 (UL: 240)
180...260 ±0
250...370 ±0
50 / 60 ±2
TN, TT, IT , ∆-mains
9)
3 x 0...Uin
0 - max. 599
L
50
20 21
R R
3 3
59 71
37 45
145 180
217 270
261 324
165 198
200 315
8 8
16 16
1350 1620
1230 1470
159 198
145 180
101 90
3 3
95 95
2 2
160 160
10)
GB - 13