Local And Remote Control; Local Control - ABB ACS1000 User Manual

6. To cancel the setting and keep the original setting, press any of the mode selection keys.
The selected keypad mode is entered.
ACT
I
10.4

Local and remote control

The local-remote feature of the CDP control panel allows selecting the control location of the
drive. Possible are:
-

Local control

- Remote control
In this context, remote control is not necessarily equivalent to higher-level control. For more
information, see "10.4.2 Remote control" on page 147.
10.4.1 Local control
In local control mode, full operational control of the drive is enabled from the local operator
panel. Commands from remote have no effect.
- To enter the local control mode, press the LOC-REM key.
Local control is indicated by the letter L.
ACT
I
3BHS213401 E01 REV H
PAR FUNC DRIVE
0
PAR FUNC DRIVE
0
ACS1000 AIR-COOLED USER MANUAL
1 L -> 0.0 rpm 0
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 6
1 L -> 600.0 rpm 0
Status Ready to Strt
MotorSpeed 0.00 rpm
Power 0.0 %
10 CDP CONTROL PANEL
146/184