ABB ACS1000 User Manual page 12

1.8 User's responsibilities
It is the responsibility of those in charge of the drive to ensure that each person involved in the
installation, operation or maintenance of the drive has received the appropriate training and
has thoroughly read and clearly understood the instructions in this manual and the relevant
safety instructions.
1.9 Intended use of equipment
Those in charge of the drive must ensure that the drive is only used as specified in the
contractual documents, operated under the conditions stipulated in the technical
specifications and on the rating plate of the drive, and serviced in the intervals specified by
ABB.
Use of the drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended and approved by
ABB must be used.
Unauthorized modifications and constructional changes of the drive are not permitted.
1.10 Cyber security disclaimer
This product is designed to be connected to and to communicate information and
data via a network interface. It is the customer's sole responsibility to provide and
continuously ensure a secure connection between the product and Customer
network or any other network (as the case may be).
Customer shall establish and maintain any appropriate measures (such as but not
limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product,
the network, its system and the interface against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data
or information.
ABB and its affiliates are not liable for damages and/or losses related to such
security breaches, any unauthorized access, interference, intrusion, leakage and/or
theft of data or information.
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL
01 ABOUT THIS MANUAL
10/184