7. Push the cushions together so they fit tightly around the bare screen and tighten
the screws.
7.6.1.3
Preparing cables for cable entries with sealing modules
1. Unscrew the frame and remove the sealing modules.
For information on removing and installing the sealing modules and using the
compression wedge (1), see "Appendix A – Additional manuals".
Figure 7-14: Frame with sealing modules
(1) Sealing modules
3BHS213401 E01 REV H
1
(2) Compression wedge
ACS1000 AIR-COOLED USER MANUAL
07 ELECTRICAL INSTALLATION
2
100/184