Dell Force10 TeraScale E Series Reference Manual page 1476

advertise-interval
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
authentication-type
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
1476 | Virtual Router Redundancy Protocol (VRRP)
Set the time interval between VRRP advertisements.
advertise-interval time
time Enter a number of in seconds for IPv4 or centiseconds for IPv6.
Range: 1 to 255, in increments of 25 for IPv6.
IPv4 Default: 1 second.
IPv6 Default: 100 centiseconds
1 second for IPv4 and 100 centiseconds for IPv6
INTERFACE-VRRP
Version 8.3.2.0 Introduced for IPv6 on E-Series TeraScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
Dell Force10 recommends that you keep the default setting for this command. If you do change the
time interval between VRRP advertisements on one router, you must change it on all routers.
Enable authentication of VRRP data exchanges.
authentication-type simple [encryption-type] password
simple
Enter the keyword simple to specify simple authentication.
encryption-type
(OPTIONAL) Enter one of the following numbers:
•
•
password
Enter a character string up to 8 characters long as a password. If you do not enter an
encryption-type, the password is stored as clear text.
Not configured.
VRRP
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
The password is displayed in the
If you choose to encrypt the password, the
0 (zero) for an unencrypted (clear text) password
7 (seven) for hidden text password.
show config output if the encryption-type is unencrypted or clear text.
show config displays an encrypted text string.