Advertisement
linecard slot
port-set port-pipe
buffer-policy
buffer-profile
None
Command Mode
BUFFER PROFILE
Usage
If you attempt to apply a buffer profile to a non-existent port-pipe, FTOS displays the following
Information
message. However, the configuration still appears in the running-config.
%DIFFSERV-2-DSA_BUFF_CARVING_INVALID_PORT_SET: Invalid FP port-set 2 for linecard 2.
Valid range of port-set is <0-1>
Usage
When you remove a buffer-profile using the command no buffer-profile [fp | csf] from
Information
CONFIGURATION mode, the buffer-profile name still appears in the output of show buffer-profile
[detail | summary]. After a line card reset, the buffer profile correctly returns to the default values,
but the profile name remains. Remove it from the show buffer-profile [detail | summary]
command output by entering no buffer [fp-uplink | csf] linecard port-set buffer-policy from
CONFIGURATION mode and no buffer-policy from INTERFACE mode.
Command
H
Version 7.7.1.0
History
Version 7.6.1.0
Related
buffer-profile (Configuration)
Commands
buffer-profile (Configuration)
c s
Create a buffer profile that can be applied to an interface.
Syntax
buffer-profile {{fp | csf} profile-name | global {1Q|4Q}
Parameters
fp
csf
profile-name
global
1Q
4Q
Defaults
global 4Q
Command Mode
CONFIGURATION
linecard
Enter the keyword
port-set
Enter the keyword
Range: 0-3 on C-Series, 0-1 on S-Series
buffer-policy
Enter the keyword
you created.
Introduced on S-Series
Introduced on C-Series
Create a buffer profile that can be applied to an interface.
Enter this keyword to create a buffer profile for the Field Processor.
Enter this keyword to create a buffer profile for the Switch Fabric Processor.
Create a name for the buffer profile.
Apply one of two pre-defined buffer profiles to all of the port-pipes in the
system.
Enter this keyword to choose a pre-defined buffer profile for single queue
(i.e non-QoS) applications.
Enter this keyword to choose a pre-defined buffer profile for four queue (i.e
QoS) applications.
followed by the line card slot number.
followed by the port-pipe number.
followed by the name of a buffer profile
S-Series Debugging and Diagnostics | 1579
Advertisement
