Advertisement
Usage
When you remove a buffer-profile using the command no buffer-profile [fp | csf] from
Information
CONFIGURATION mode, the buffer-profile name still appears in the output of show buffer-profile
[detail | summary]. After a line card reset, the buffer profile correctly returns to the default values,
but the profile name remains. Remove it from the show buffer-profile [detail | summary]
command output by entering no buffer [fp-uplink | csf] linecard port-set buffer-policy from
CONFIGURATION mode and no buffer-policy from INTERFACE mode.
Related
buffer (Buffer Profile)
Commands
reload
Usage
The buffer-profile global command fails if you have already applied a custom buffer-profile on an
Information
interface. Similarly, when buffer-profile global is configured, you cannot not apply buffer-profile on
any interface.
If the default buffer-profile (4Q) is active, FTOS displays an error message instructing you to remove
the default configuration using the command no buffer-profile global.
You must reload the system for the global buffer-profile to take effect.
buffer-profile (Interface)
c s
Apply a buffer profile to an interface.
Syntax
buffer-profile profile-name
Parameters
profile-name
Defaults
None
Command Mode
INTERFACE
Command
H
Version 7.7.1.0
History
Version 7.6.1.0
Usage
When you move to a different chassis a line card that has a buffer profile applied at interface level on
Information
the fp-uplink, the line card retains the buffer profile. To return the line card to the default buffer profile,
remove the current profile using the command no buffer-profile fp-uplink linecard from
INTERFACE mode, and then reload the chassis.
Related
buffer-profile (Configuration)
Commands
Allocate an amount of dedicated buffer space, dynamic buffer space,
or packet pointers to queues 0 to 3.
Reboot the system.
Note:
When you removed a buffer-profile using the command no buffer-profile [fp | csf]
from CONFIGURATION mode, the buffer-profile name still appears in the output of show
buffer-profile [detail | summary]. After a line card reset, the buffer profile correctly returns
to the default values, but the profile name remains. Remove it from the output using the
command no buffer [fp |csf] linecard port-set buffer-policy from CONFIGURATION
mode.
Enter the name of the buffer profile you want to apply to the interface.
Introduced on S-Series
Introduced on C-Series
Create a buffer profile that can be applied to an interface.
C-Series Diagnostics and Debugging | 1531
Advertisement
