Advertisement
Usage
Information
show hardware system-flow layer2 linecard port-set
c
Syntax
Parameters
Defaults
Command Mode
Command
History
Usage
Information
Related
Commands
Interface Management Debug Commands
1516
|
C-Series Diagnostics and Debugging
Warning:
Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
View system-flow entries.
show hardware system-flow layer2 linecard number port-set number [counters]
number
counters
None.
EXEC
EXEC Privilege
Version 4.2.1.0
Introduction
Warning:
Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
clear hardware system-flow
These commands display advanced debugging information related to the Interface Manager (IFM)
process.
•
debug ifm trace-flags
•
show software ifm
Enter a number after the following keywords:
linecard
•
After the keyword
Range: 0-7 for the C300
port-set
•
After the keyword
counters
Enter the keyword
entries.
Clear system-flow entry counters.
:
, enter the Port-Pipe/FB ID.
to view counters of system-flow
Advertisement
