Advertisement
Related
Commands
logging coredump kernel server
e
Syntax
Defaults
Command Modes
Command
History
Related
Commands
logging coredump linecard
e
Syntax
Parameters
1542
|
E-Series Debugging and Diagnostics
Should a crash occur, the large crash kernel file may take more than ten minutes to upload and may
require more space on the flash than is available. The HA module is aware of a core-dump in process
and will wait until the upload is complete before rebooting the RPM.
Note:
Application core-dumps are also automatically uploaded to flash. If there is not enough
available space for the kernel core-dump on the flash, the kernel upload will terminate.
logging coredump linecard
logging coredump kernel server
Designate the logging core-dump files to be saved to a remote server rather than flash.
logging coredump kernel server
To save the logging core-dump files to flash (the default), use the no logging coredump kernel
server command.
Saved on flash
CONFIGURATION
Version 6.5.4.0
logging coredump linecard
logging coredump kernel disable
Enable line card core-dump logging on a specific line card or on all line cards.
logging coredump linecard {slot_number [port-shutdown | no-port-shutdown] | all}
To disable line card coredump logging, use the no logging coredump linecard [slot_number |
all] command.
linecard slot number
port-shutdown
no-port-shutdown
linecard all
Enable core-dump logging on line cards
Save core-dump logging files to an alternate server
Introduced
Enable core-dump logging on line cards
Disable kernel core-dump logging
linecard
Enter the keyword
followed by the slot number to enable core-dump
logging line card details.
Range: 0 to 13 on the E1200; 0 on 6 for E600/E600i, and 0 to 5 on the E300.
port-shutdown
Enter the keyword
physical interfaces during a software exception and the subsequent core dump.
no-port-shutdown
Enter the keyword
physical interfaces remain up during a software exception and the subsequent
core dump. This is an "undo" feature for the
linecard all
Enter the keyword
cards.
to configure the system to shutdown the
to configure the system so that the
port-shutdown
to enable core-dump logging details on all line
option.
Advertisement
