Advertisement
Example
Related
Commands
Hardware Commands
clear hardware stack-unit
s
Syntax
Parameters
1582
|
S-Series Debugging and Diagnostics
Figure 66-2. show buffer-profile interface Command Example
FTOS#show buffer-profile detail csf linecard 4 port-set 0
Linecard 4 Port-set 0
Buffer-profile test
Queue#
0
1
2
3
4
5
6
7
FTOS#
buffer-profile (Configuration)
These commands display information from a hardware sub-component or ASIC.
The commands are:
•
clear hardware system-flow
•
clear hardware system-flow
•
hardware watchdog
•
show hardware layer2 acl
•
show hardware layer3
•
show hardware stack-unit
•
show hardware system-flow
Clear statistics from selected hardware components.
clear hardware stack-unit 0–7 {counters | unit 0–1 counters | cpu data-plane statistics |
cpu party-bus statistics | stack-port 0–52}
stack-unit 0-7
counters
unit 0–1 counters
Dedicated Buffer
Buffer Packets
(Bytes)
36960
718
18560
358
18560
358
18560
358
9600
64
9600
64
9600
64
9600
63
Create a buffer profile that can be applied to an interface.
stack-unit followed by 0 to 7 to select a particular
Enter the keyword
stack member and then enter one of the following command options
to clear a specific collection of data.
counters
Enter the keyword
member.
unit
Enter the keyword
along with a port-pipe number, from
counters
followed by the keyword
port-pipe.
Note: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
to clear the counters on the selected stack
0
to clear the counters on the selected
1
to
,
Advertisement
