Advertisement
show revision
e
Syntax
Defaults
Command Modes
Command
History
1552
|
E-Series Debugging and Diagnostics
Important Points to Remember
•
A sending task enqueues messages into the SWP queue3 for a receiving task and waits for an
acknowledgement.
•
If no response is received within a period of time, the SWP time-out mechanism re-submits the
message at the head of the FIFO queue.
•
After retrying several times, the following time-out message is generated:
SWP-2-NOMORETIMEOUT
•
In the display output in
mechanism reached the maximum number of retransmissions without an acknowledgement.
Display revision numbers of all line card, RPM, and SFM components.
show revision
No default behavior or value
EXEC Privilege
Version 7.5.1.0
Introduced
Figure
65-13, a retry (Retries) value of zero indicates that the SWP
Advertisement
